Free-Body Diagrams in Physics: How to Draw Forces and Solve Mechanics Problems
free-body-diagramsforcesnewtons-lawsmechanicsworked-examplesphysics-practice

Free-Body Diagrams in Physics: How to Draw Forces and Solve Mechanics Problems

SStudy Physics Editorial Team
2026-11-01
8 min read

Learn how to draw free-body diagrams, identify forces, resolve components, and solve mechanics problems with Newton’s laws.

Free-body diagrams turn a complicated mechanics question into a clear force model. This guide shows you how to choose the system, identify every external force, draw a useful diagram, resolve components, and apply Newton’s laws step by step in problems involving surfaces, slopes, friction, tension, and connected objects.

Overview

A free-body diagram (FBD) is a simplified drawing of one object showing the external forces acting on it. The object is usually represented by a box, dot, or simple shape. Each force is drawn as an arrow with a label and a direction. The diagram does not show the object’s motion, its path, or forces that the object exerts on other objects.

The purpose is not artistic accuracy. A good free-body diagram helps you translate a physical situation into Newton’s second law:

ΣF = ma

This equation must be applied separately in each chosen direction. For a stationary object or an object moving at constant velocity, the acceleration is zero, so the net force in each direction is also zero. For an accelerating object, the net force points in the direction of acceleration.

Before starting, define the system: the object or group of objects you are analysing. This decision determines which forces belong on the diagram. For example, if the system is a book, the book’s weight and the table’s normal force belong on its FBD. The force the book exerts on the table does not, because that force acts on the table rather than on the book.

For a broader problem-solving routine, see How to Solve Physics Problems Step by Step. Once your force model is complete, a topic-based physics formula sheet can help you select and rearrange the relevant equations.

Checklist by scenario

1. Any object: identify the basic forces

  1. Draw the object as a dot or box.
  2. Choose horizontal and vertical axes, or axes parallel and perpendicular to a slope.
  3. Draw the weight, W = mg, vertically downward from the object’s centre.
  4. Add contact forces, applied forces, tension, drag, or other forces only when the situation provides them.
  5. Label each arrow with a symbol and, if known, its value.

Weight is caused by gravity and points downward, even when the object is on an incline. The normal force is a contact force perpendicular to the surface; it is not automatically equal to the weight. Friction acts along the contact surface and opposes relative motion or the tendency of surfaces to move relative to each other.

2. Block on a horizontal surface

For a block resting on a level table, the usual forces are weight downward and normal force upward. If a horizontal force pulls the block, add that applied force in the appropriate direction. If friction is present, add it opposite the motion or intended motion.

Suppose a 5 kg block is pulled horizontally by 18 N on a surface with 6 N of kinetic friction. Vertically, there is no acceleration:

ΣFy = N - mg = 0

Horizontally:

ΣFx = 18 - 6 = ma

Therefore, a = 12/5 = 2.4 m/s² in the direction of the pull. The diagram makes the subtraction clear: the applied force and friction act in opposite horizontal directions.

3. Block on an inclined plane

For a slope, rotate the axes so that one axis is parallel to the incline and the other is perpendicular to it. This avoids resolving the normal force into components. The weight is still vertical, but its components relative to the rotated axes are:

  • mg sin θ parallel to the slope, pointing downhill
  • mg cos θ perpendicular to the slope, pointing into the surface

If there is no acceleration perpendicular to the slope, the normal force is often N = mg cos θ. This relationship depends on the forces present; an additional push or pull can change the normal force. Along the slope, write an equation such as mg sin θ - f = ma when the block tends to slide downhill and friction acts uphill.

Do not draw both the full weight vector and its two components as separate physical forces in the same force sum. The components are alternative representations of the same weight force.

4. Object attached to a rope

Tension acts along a taut rope and pulls away from the object. It does not push. For a hanging mass, the common vertical forces are tension upward and weight downward:

T - mg = ma

If the mass accelerates downward, choose downward as positive instead and write mg - T = ma. Either choice works if the signs are used consistently.

For an idealised massless rope over a frictionless pulley, connected objects may share the same acceleration magnitude and the tension may be the same throughout the rope. These are modelling assumptions, not universal rules. If the rope stretches or the pulley has significant resistance, the model may need modification.

5. Two connected objects

Draw a separate FBD for each object before combining equations. This prevents you from treating an internal force as an external force on the whole system. For a block on a table connected to a hanging mass, the table block may have tension pulling horizontally, while the hanging mass has tension upward and weight downward.

Write one Newton’s second-law equation for each object, then solve the simultaneous equations. You can also treat both objects as one system: the internal tension cancels, leaving only the external forces. Use the system approach to find acceleration, then return to an individual-object equation to find tension.

6. Static friction or impending motion

Static friction adjusts to the amount required to prevent slipping, up to a maximum value. It is not always equal to μsN. If the object is stationary, first use the force balance to determine the required friction. Compare that value with the maximum possible static friction, fs,max = μsN. If the required value is too large, the object cannot remain at rest and the motion model must be used.

What to double-check

  • System: Have you stated which object or objects the diagram represents?
  • External forces: Does every arrow come from a real interaction with something outside the chosen system?
  • Direction: Is weight vertical, is the normal force perpendicular to the surface, and is tension along the rope?
  • Friction: Does it oppose relative motion or the tendency of motion rather than automatically opposing the applied force?
  • Axes: Would a rotated coordinate system make an incline problem simpler?
  • Components: Have you resolved a force only when needed, and avoided counting the original force and its components together?
  • Signs: Did you state a positive direction and keep it throughout the calculation?
  • Units: Are force values in newtons, mass in kilograms, acceleration in metres per second squared, and angles in the mode expected by your calculator?

Check limiting cases as well. If friction is set to zero, does your result reduce to the frictionless case? If the applied force increases, should the acceleration increase? If the net force is zero, is your answer consistent with rest or constant velocity? These checks often catch a reversed sign or an omitted force faster than redoing every line.

For more guidance on evaluating a final result, use How to Check if Your Physics Answer Makes Sense. Unit conversions and SI prefixes are covered in the Physics Units and SI Prefixes Guide.

Common mistakes

Drawing motion instead of forces: An arrow showing velocity or acceleration is not automatically a force. Keep motion information separate from the FBD unless the question specifically asks you to show it.

Adding an action-reaction pair to one diagram: Newton’s third-law forces act on different objects. If you draw the force of the table on the book, do not also draw the force of the book on the table on the book’s FBD.

Assuming N = mg in every situation: This is true for a stationary object on a horizontal surface when no other vertical forces act. It is not generally true on an incline, during vertical acceleration, or when an angled force is applied.

Using friction in the wrong direction: Friction opposes slipping between surfaces, not necessarily the object’s overall direction of travel. Determine which way the surfaces would move relative to each other without friction.

Skipping the diagram because the problem looks easy: A quick FBD is often most valuable in a short question, where an omitted normal force or incorrect tension direction can change the entire answer.

Substituting numbers too early: Keep equations symbolic until the force directions and signs are correct. Expressions such as T - mg = ma are easier to inspect than a calculator result with no visible reasoning.

When to revisit

Return to this checklist whenever a mechanics problem introduces a new interaction, changes the chosen system, or adds a surface, rope, pulley, incline, or applied force. It is especially useful before a revision session or exam practice set: redraw the FBD from scratch rather than relying on a memorised diagram.

Use this five-step routine each time:

  1. Choose and state the system.
  2. List every external interaction.
  3. Draw and label the force arrows.
  4. Choose axes and resolve components where necessary.
  5. Write ΣF = ma for each independent direction and check units, signs, and limiting cases.

Then practise without looking at the solution. Start with a block on a horizontal surface, move to an incline with friction, and finish with connected objects. Compare your diagram before comparing your arithmetic. A correct free-body diagram is the foundation of reliable, step-by-step physics solutions.

For additional mechanics practice, browse the Physics Practice Questions by Topic hub and the Mechanics Revision Guide.

Related Topics

#free-body-diagrams#forces#newtons-laws#mechanics#worked-examples#physics-practice
S

Study Physics Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.