Learn a repeatable method for solving kinematics problems: translate the wording into a motion model, identify known and unknown quantities, choose an appropriate equation, manage signs and units, and check whether the final answer makes physical sense.
Overview
Kinematics describes motion without explaining the forces that cause it. Most introductory kinematics questions involve some combination of displacement, initial velocity, final velocity, acceleration, and time. These quantities are commonly represented by the symbols s, u, v, a, and t.
The most useful constant-acceleration equations are:
- v = u + at
- s = ut + ½at²
- v² = u² + 2as
- s = ½(u + v)t
These equations apply when acceleration is constant over the interval being considered. They are often called SUVAT equations. Do not treat them as a list to memorize without context: the better habit is to select an equation based on the quantities you know and the quantity you need.
Use this general workflow for nearly every problem:
- Read the question once for the physical situation, then read it again for the data.
- Draw a simple motion diagram and choose a positive direction.
- Write the known values and the unknown value using symbols.
- Convert all measurements to compatible units, usually metres, seconds, and metres per second.
- Choose an equation containing the unknown and the quantities you know.
- Substitute values with their signs included, solve algebraically, and report units.
- Check the result against the diagram and the expected physical behaviour.
For a broader reference, compare this process with the general method in How to Solve Physics Problems Step by Step and review the related guide to choosing SUVAT equations.
Checklist by scenario
Scenario 1: One-dimensional motion with constant acceleration
Start by marking the object's initial position and final position on a line. Choose one direction as positive. If the object moves in that direction, its velocity is positive; if it moves opposite to that direction, its velocity is negative.
Worked example: A cyclist starts at 4 m/s and accelerates at 2 m/s² for 5 s. Find the final velocity.
- Known: u = 4 m/s, a = 2 m/s², t = 5 s
- Unknown: v
- Equation: v = u + at
- Substitution: v = 4 + (2)(5) = 14 m/s
The cyclist's speed increases because the acceleration has the same sign as the initial velocity.
Scenario 2: Finding displacement
When time, initial velocity, and constant acceleration are known, use s = ut + ½at². Keep the square on the time value and include the acceleration sign.
Worked example: A car travels at 10 m/s and accelerates at 3 m/s² for 4 s. Its displacement is:
s = (10)(4) + ½(3)(4²) = 40 + 24 = 64 m.
If the object starts from rest, then u = 0, so the equation becomes s = ½at². Do not remove the first term unless the question actually states that the initial velocity is zero.
Scenario 3: No time is given
If the question gives initial velocity, final velocity, acceleration, and displacement but does not give time, use v² = u² + 2as. This equation is useful because it contains no time variable.
Worked example: A runner increases speed from 3 m/s to 9 m/s over 24 m. The acceleration is:
a = (v² - u²) ÷ 2s = (9² - 3²) ÷ (2 × 24) = 72 ÷ 48 = 1.5 m/s².
Scenario 4: Free fall and vertical motion
Near Earth's surface, an object in free fall has an acceleration of approximately 9.8 m/s² downward. The main challenge is not the equation; it is choosing a sign convention.
If upward is positive, use a = -9.8 m/s². If downward is positive, use a = +9.8 m/s². Either convention works if you use it consistently.
For an object dropped from rest, u = 0. At the highest point of an upward launch, the instantaneous vertical velocity is v = 0, but the acceleration is still downward. A zero velocity at one instant does not mean that gravity has stopped acting.
Scenario 5: Horizontal projectile motion
Separate the motion into horizontal and vertical components. For an ideal projectile with air resistance ignored:
- Horizontal acceleration is zero, so vx remains constant.
- Vertical acceleration is due to gravity, so ay = -9.8 m/s² if upward is positive.
- The same time interval applies to both components.
Find the time from the vertical motion, then use x = vxt for horizontal displacement. This two-stage approach is safer than trying to force the entire motion into one equation.
Scenario 6: Multi-step motion
Divide the journey into intervals whenever the acceleration, direction, or type of motion changes. Solve one interval first, then use its final position or velocity as the next interval's initial condition.
For example, a vehicle may accelerate for 6 s and then travel at constant velocity. In the first interval, calculate the final velocity and displacement. In the second interval, use s = vt because acceleration is zero. Add displacements only after confirming that both intervals use the same coordinate system.
What to double-check
- Units: Convert kilometres per hour to metres per second by multiplying by 5/18, or divide by 3.6. Convert minutes to seconds before using a seconds-based equation.
- Vector signs: Velocity, displacement, and acceleration can be positive or negative. Speed and distance are scalar quantities and are not normally assigned direction signs.
- Model assumptions: SUVAT equations require constant acceleration. If acceleration changes significantly, use separate intervals or a method appropriate to variable acceleration.
- Precision: Keep extra digits during working and round at the end. Match the precision of the given data unless your course specifies another rule.
- Dimensions: Check that the units on both sides of an equation agree. For example, acceleration multiplied by time has units of m/s, while acceleration multiplied by time squared has units of m.
- Graph meaning: On a displacement-time graph, gradient represents velocity. On a velocity-time graph, gradient represents acceleration and area represents displacement.
A quick equation-selection flowchart is: if you need velocity and know time, try v = u + at; if you need displacement and know time, try s = ut + ½at²; if time is missing, try v² = u² + 2as; if both initial and final velocities are available with time, try s = ½(u + v)t.
Common mistakes
- Choosing an equation because it looks familiar: List the variables first. An equation is suitable only if it contains the unknown and enough known quantities to solve it.
- Confusing distance with displacement: Distance is the total path length; displacement is the signed change in position. An object can travel a nonzero distance and finish with zero displacement.
- Using the wrong acceleration sign: Acceleration opposite to the chosen positive direction is negative, even if the object's speed is increasing in that negative direction.
- Assuming “stops” means acceleration is zero: An object can stop briefly while still accelerating. A thrown ball has zero vertical velocity at its highest point but nonzero downward acceleration.
- Mixing stages of a journey: Do not use the total time in an equation that describes only one interval.
- Rounding too early: Early rounding can noticeably affect results in multi-step calculations, especially when squaring values.
When reviewing a wrong answer, do not immediately replace the number. Identify the first step where the model, sign, unit, or algebra stopped matching the situation. That diagnosis is more useful for future physics practice problems.
When to revisit
Return to this checklist before a mechanics quiz, after learning a new type of motion, or whenever your course changes from one-dimensional motion to projectiles or graphs. Revisit it after completing a practice set if several errors involve the same stage, such as unit conversion or equation selection.
For exam preparation, use a short three-pass routine:
- Pass one: Solve familiar problems without looking at the equations.
- Pass two: For missed problems, rewrite the known values, sign convention, and equation before recalculating.
- Pass three: Attempt a mixed set containing free fall, horizontal motion, constant velocity, and multi-step questions.
Keep a small error log with columns for “problem type,” “first incorrect step,” and “better check.” Pair this article with the physics formula sheet by topic, the mechanics revision guide, and the site's practice questions by topic. Before submitting any solution, complete this final check: equation chosen, units consistent, signs explained, answer labelled, and result physically reasonable.