Choosing a kinematics equation becomes much easier when you classify the problem before calculating. This guide gives you a reusable SUVAT decision flowchart, a problem-classification template, worked examples, and checks for signs, units, and constant acceleration.
Overview
The SUVAT equations describe motion in a straight line when acceleration is constant. Different courses may use different symbols: s for displacement, u for initial velocity, v for final velocity, a for acceleration, and t for time. In university or AP Physics materials, you may instead see x, v0, v, a, and t.
The notation changes, but the decision process does not. First identify the known and unknown quantities. Then choose an equation containing the unknown and only quantities you already know. This usually avoids unnecessary algebra and reduces the chance of using the wrong information.
The five common constant-acceleration equations are:
- v = u + at
- s = ut + ½at2
- s = vt − ½at2
- s = ½(u + v)t
- v2 = u2 + 2as
These equations are not interchangeable in every situation. They assume one-dimensional motion and constant acceleration. For a falling object, this may be a reasonable model if air resistance is ignored and the local gravitational acceleration is treated as constant. If acceleration changes significantly, use a method designed for variable acceleration instead.
Checklist by scenario
Use this flowchart before writing an equation:
- Is the acceleration constant? If yes, continue with SUVAT. If no, stop and choose a variable-acceleration method or divide the motion into suitable intervals.
- Choose a positive direction. Record it before assigning signs to velocity, displacement, or acceleration.
- List all five variables: s, u, v, a, and t. Write a value for each known quantity and a question mark for the unknown.
- Count the useful quantities. Select an equation that contains the unknown and does not introduce another unknown.
- Convert units and substitute only after the equation is chosen.
Scenario 1: You know initial velocity, acceleration, and time
Use v = u + at when the question asks for final velocity and gives u, a, and t. For example, an object starts at 5 m/s and accelerates at 2 m/s2 for 4 s:
v = 5 + (2)(4) = 13 m/s.
Scenario 2: You know initial velocity, acceleration, and time and need displacement
Use s = ut + ½at2. If u = 3 m/s, a = 2 m/s2, and t = 6 s, then:
s = (3)(6) + ½(2)(62) = 54 m.
Scenario 3: You know initial and final velocity, acceleration, and need displacement
Use v2 = u2 + 2as when time is not given. Rearrange to s = (v2 − u2)/(2a). For u = 4 m/s, v = 10 m/s, and a = 3 m/s2:
s = (102 − 42)/(2 × 3) = 14 m.
Scenario 4: You know displacement, initial velocity, and time and need acceleration
Use s = ut + ½at2 and rearrange for a. If s = 30 m, u = 4 m/s, and t = 5 s:
30 = (4)(5) + ½a(52), so a = 0.8 m/s2.
Scenario 5: You know displacement, final velocity, and time and need initial velocity
Use s = ½(u + v)t. With s = 40 m, v = 12 m/s, and t = 5 s:
40 = ½(u + 12)(5), giving u = 4 m/s.
Copy this template into your notes for future kinematics practice problems:
Direction chosen: ____________________ Known: s = _____ u = _____ v = _____ a = _____ t = _____ Unknown: ____________________________ Constant acceleration? Yes / No Equation selected: ___________________ Unit conversion needed: ______________ Answer with unit: ____________________
What to double-check
Sign convention
Positive and negative values describe direction, not whether a quantity is good or bad. If upward is positive, upward velocity is positive and downward acceleration due to gravity is negative. If downward is positive, the same acceleration is positive. Either convention can work if you use it consistently.
Displacement versus distance
Displacement includes direction and can be negative. Distance is the total path length and is not normally negative. SUVAT equations use displacement in the chosen direction, so a problem involving a turnaround may need to be split into separate stages.
Units and powers
Use compatible units before substituting. Convert kilometres per hour to metres per second when the rest of the problem uses SI units. Remember that acceleration has units of m/s2, and the term at2 must have units of metres.
Physical reasonableness
Check whether the result matches the situation. A stationary object with positive acceleration should not have a negative final speed unless your sign convention indicates a reversal. A displacement should also be consistent with the approximate average velocity multiplied by time.
For a broader method covering diagrams, equations, substitution, and checking, see How to Solve Kinematics Problems. You can also compare notation and units with the Physics Constants and Data Values guide.
Common mistakes
- Choosing an equation because it looks familiar: choose it from the known and unknown variables, not from the wording alone.
- Using a time-based equation when time is unknown: the equation v2 = u2 + 2as is often the efficient choice when displacement, velocities, and acceleration are available.
- Confusing velocity with speed: velocity can be negative; speed is its magnitude.
- Forgetting that acceleration can oppose motion: an object moving in the positive direction may have negative acceleration and slow down.
- Mixing stages of motion: do not use the final velocity from one stage as though it applied at the start of another without stating the connection.
- Rounding too early: keep extra figures during the calculation and round the final answer appropriately.
When to revisit
Return to this flowchart whenever a new question feels unclear, especially before starting a homework set or physics exam practice session. It is also useful after marking work: classify the question again and identify whether the error came from the model, the variable list, the equation, the signs, the units, or the algebra.
Before a new course unit or exam season, check that your class uses the same notation and assumptions. Some courses write s while others write x; some provide a formula sheet, while others expect selected equations to be recalled. The underlying relationships remain the same, but your revision notes should match the notation used in your questions.
For a practical study routine, solve three problems without looking at the equations. For each one, complete the template, state why your selected equation fits, calculate the result, and perform a unit and reasonableness check. Then review your mistakes using the relevant kinematics explanations in the kinematics equations guide. With repeated classification practice, choosing the correct equation becomes a short setup decision rather than a guessing exercise.