Kinematics becomes much easier when you treat every motion problem as a sequence of decisions rather than a hunt for a memorised formula. This guide explains displacement, velocity, acceleration, motion graphs, and the SUVAT equations, then gives you a reusable checklist for constant-acceleration problems, free fall, reaction-time questions, unit conversions, and exam checks.
Overview
Kinematics is the part of mechanics that describes motion without considering the forces causing it. The central quantities are displacement, velocity, acceleration, and time.
- Displacement, s: the change in position in a stated direction. It is measured in metres (m) and is a vector.
- Velocity, v: the rate of change of displacement. It is measured in metres per second (m/s) and includes direction.
- Acceleration, a: the rate of change of velocity. It is measured in metres per second squared (m/s²).
- Time, t: the duration of the motion, measured in seconds (s).
- Initial velocity, u: the velocity at the start of the chosen time interval.
- Final velocity, v: the velocity at the end of that interval.
The standard SUVAT equations apply when acceleration is constant. The name comes from the five variables: s, u, v, a, and t.
| Equation | Best used when |
|---|---|
| v = u + at | Displacement is not needed. |
| s = ut + ½at² | Final velocity is not given or needed. |
| s = vt − ½at² | Initial velocity is not given or needed. |
| v² = u² + 2as | Time is not given or needed. |
| s = ½(u + v)t | Acceleration is not needed directly. |
These equations are not interchangeable in every situation. Before choosing one, identify the known values, the unknown value, and whether the acceleration is constant. If acceleration changes during the motion, divide the motion into suitable intervals or use a different method, such as interpreting a velocity-time graph.
A useful general method is to choose a positive direction first. For example, you might define upward as positive in a vertical-motion problem. Then record downward velocities and accelerations as negative. Keeping one sign convention throughout prevents many errors.
Checklist by scenario
1. Any constant-acceleration problem
- Sketch the situation. Mark the initial and final positions, the direction of motion, and any relevant distances.
- Choose a positive direction. Write it down if the motion is vertical or involves reversing direction.
- List the variables. Record s, u, v, a, and t with units and signs.
- Translate the wording carefully. “Starts from rest” means u = 0. “Comes to rest” means v = 0. “Constant speed” means a = 0, although displacement may still be nonzero.
- Count the knowns and unknowns. Select an equation containing the required unknown and only quantities you know.
- Substitute with units. Keep the algebra visible instead of entering every value into a calculator immediately.
- Check the result. Consider its units, sign, size, and whether it matches the physical situation.
2. Finding velocity or acceleration
If displacement is not involved, start with v = u + at. For example, a cyclist increases velocity from 4 m/s to 10 m/s in 3 s:
a = (v − u) ÷ t = (10 − 4) ÷ 3 = 2 m/s².
The positive acceleration means velocity increased in the selected positive direction. If the final velocity were smaller than the initial velocity, the calculated acceleration would be negative under the same convention.
3. Finding displacement
Use s = ut + ½at² when you know initial velocity, acceleration, and time. Suppose an object starts at 2 m/s and accelerates at 3 m/s² for 4 s:
s = (2)(4) + ½(3)(4²) = 8 + 24 = 32 m.
The term ut represents the displacement the object would have at its initial velocity, while the ½at² term accounts for the additional displacement caused by acceleration.
4. Problems without time
When time is absent and you need velocity or displacement, try v² = u² + 2as. A car travelling at 5 m/s accelerates at 2 m/s² over 20 m:
v² = 5² + 2(2)(20) = 105, so v = √105 ≈ 10.2 m/s.
Because squaring removes the sign, decide which direction the object is moving before selecting the physically appropriate value of v. In a simple forward-motion problem, the positive root is usually the relevant answer.
5. Free fall and vertical motion
Near Earth's surface, an object in free fall has acceleration due to gravity, commonly represented by g. Many school problems use g = 9.8 m/s², unless the question specifies another value or expects a rounded approximation.
For an object released from rest and taking downward as positive, u = 0 and a = g. The displacement after time t is therefore s = ½gt². If upward is positive instead, the acceleration is a = −g. Both approaches work if the signs are used consistently.
Remember that “dropped” usually means initial velocity is zero, while “thrown downward” gives a nonzero initial velocity. An object thrown upward has positive initial velocity if upward is positive, but its acceleration remains negative throughout the flight.
6. Reaction-time problems
Reaction questions often combine constant-speed motion with a later braking phase. During the reaction period, the driver may travel at constant velocity, so sreaction = vt. If braking involves constant acceleration, use a SUVAT equation for the braking distance, commonly v² = u² + 2as.
The total stopping distance is:
total distance = reaction distance + braking distance.
Keep the two stages separate. The acceleration during the reaction stage is usually zero, whereas the braking acceleration is negative if forward is positive.
7. Motion graphs
Graphs can provide the same information as equations:
- The gradient of a displacement-time graph is velocity.
- The gradient of a velocity-time graph is acceleration.
- The area under a velocity-time graph is displacement.
- The area under an acceleration-time graph is the change in velocity.
For a velocity-time graph, split irregular shapes into rectangles, triangles, or trapezia. Add signed areas rather than automatically adding all areas as positive. Area below the time axis represents displacement in the negative direction.
What to double-check
- Units: Convert kilometres per hour to metres per second by dividing by 3.6. Convert minutes to seconds before using SI-based equations. For example, 72 km/h = 20 m/s.
- Displacement versus distance: Distance is the total path length and cannot be negative. Displacement depends on direction and can be zero after a return journey.
- Speed versus velocity: Speed is a scalar; velocity includes direction. A change in direction can change velocity even if speed stays constant.
- Acceleration signs: Negative acceleration does not always mean slowing down. An object moving in the negative direction can speed up when its acceleration is also negative. Compare the signs of velocity and acceleration.
- Time intervals: Check whether the question describes the entire motion or only one stage. If conditions change, use separate equations for each stage.
- Significant figures: Do not report many more digits than the measurements justify. Follow the rounding convention required by your course or exam.
- Reasonableness: A falling object’s speed should increase while it accelerates downward. A calculated negative time or an implausibly large distance usually signals a setup or unit error.
For a broader problem-solving routine, compare this checklist with How to Solve Physics Problems Step by Step. You can also use the physics formula sheet by topic to review units and related mechanics equations.
Common mistakes
- Choosing a formula because it looks familiar: Start with the known and unknown quantities instead. The equation must match the information provided.
- Using SUVAT when acceleration is not constant: A changing acceleration requires a different model or separate time intervals.
- Forgetting the square on time: In ½at², square the complete time value before multiplying.
- Mixing kilometres per hour and metres per second: Convert every velocity to a consistent unit system before substitution.
- Using g with the wrong sign: Gravity always points downward, but its algebraic sign depends on your chosen positive direction.
- Confusing “distance travelled” with displacement: A return journey may have positive distance but zero net displacement.
- Rounding too early: Keep extra calculator digits through intermediate steps and round the final answer.
- Ignoring the second mathematical root: When solving a squared equation, interpret both possible signs and reject any value that does not fit the stated motion.
If a question involves forces as well as motion, draw a free-body diagram before applying Newton’s laws. The guide to free-body diagrams in physics can help you separate the force analysis from the kinematics.
When to revisit
Return to this guide whenever you begin a new mechanics unit, start a set of kinematics practice problems, or notice that you are selecting equations by memory rather than by variables. It is particularly useful before an exam: practise the decision process, not just the final formulas.
Use this short pre-submission checklist:
- Did I define a positive direction?
- Did I distinguish distance from displacement and speed from velocity?
- Are all quantities in compatible units?
- Is the acceleration constant for the interval I modelled?
- Did I choose an equation containing the unknown and only appropriate known values?
- Does the answer have the correct unit and a physically sensible sign and magnitude?
For revision planning, pair this article with physics practice questions by topic, then attempt problems without looking at the solution until your setup is complete. After marking your work, record the type of error—formula choice, units, signs, algebra, or interpretation. That record turns individual mistakes into a targeted study plan. When you need a wider review of motion, energy, and momentum, use the mechanics revision guide as the next step.