This physics formula sheet organizes essential equations by topic and explains what each symbol means, which units to use, when an equation applies, and how to avoid common substitution errors. Use it as a working reference for revision, homework, and exam preparation—not as a replacement for understanding the physical situation.
Overview
A formula is useful only when it matches the model described in the question. Before choosing an equation, identify the topic, list the known quantities, define the unknown, and check that the units are compatible. The following reference uses SI units unless stated otherwise: metres (m), seconds (s), kilograms (kg), newtons (N), joules (J), watts (W), coulombs (C), volts (V), amperes (A), ohms (Ω), hertz (Hz), and kelvin (K).
Mechanics and motion
- Speed: v = d/t. Use for distance travelled per unit time. Here, d is distance in metres and t is time in seconds.
- Acceleration: a = Δv/Δt. Acceleration measures how quickly velocity changes. Its unit is m/s².
- Constant-acceleration equations: v = u + at; s = ut + ½at²; v² = u² + 2as; and s = ½(u + v)t. These are appropriate only when acceleration is constant. The symbols are u for initial velocity, v for final velocity, s for displacement, a for acceleration, and t for time.
- Newton’s second law: F = ma. The net force F in newtons equals mass m multiplied by acceleration a. Use the resultant force, not automatically one individual force.
- Weight: W = mg. Weight is the gravitational force on a mass. Near Earth, g is commonly approximated as 9.8 m/s² or 9.81 m/s², depending on the course instructions.
- Momentum: p = mv. Momentum has units of kg·m/s. For an isolated system, total momentum before an interaction equals total momentum after it.
For force questions, draw a force diagram before selecting an equation. The guide Free-Body Diagrams in Physics explains how to represent forces and find the resultant.
Work, energy, and power
- Work done by a constant force: W = Fs cos θ, where θ is the angle between the force and displacement. If the force acts in the direction of motion, this reduces to W = Fs.
- Kinetic energy: Ek = ½mv². Because velocity is squared, doubling speed increases kinetic energy by a factor of four.
- Gravitational potential energy: Ep = mgh. This equation applies near a reference level where h is the vertical height change.
- Power: P = W/t or P = E/t. Power is the rate of energy transfer and is measured in watts.
- Efficiency: efficiency = useful output energy ÷ total input energy. Multiply by 100 to express the result as a percentage.
Energy equations are often most effective when you first state the system and then write an energy balance, such as input energy = useful output energy + wasted energy. Do not confuse power, which describes how quickly energy is transferred, with energy itself.
Waves and oscillations
- Wave speed: v = fλ, where f is frequency in hertz and λ is wavelength in metres.
- Frequency and period: f = 1/T. Frequency is the number of cycles per second; period T is the time for one cycle.
- Angular frequency: ω = 2πf. This is used frequently in sinusoidal motion and university-level wave problems.
Keep amplitude, wavelength, frequency, and speed distinct. Amplitude relates to the size of an oscillation, while frequency describes how often the oscillation repeats. In a given medium, changing frequency may also change wavelength if the wave speed remains fixed.
Electricity and circuits
- Charge: Q = It. Charge Q in coulombs equals current I in amperes multiplied by time t in seconds.
- Potential difference: V = W/Q. Voltage is energy transferred per unit charge.
- Ohm’s law: V = IR. Use this relationship for an ohmic component under conditions where its resistance remains constant.
- Electrical power: P = IV. Using V = IR, this can also be written as P = I²R or P = V²/R.
- Electrical energy: E = Pt or E = VIt. Confirm whether the question requires joules or a household energy unit.
For resistors in series, the total resistance is Rtotal = R1 + R2 + ... . For resistors in parallel, 1/Rtotal = 1/R1 + 1/R2 + ... . Series components carry the same current; parallel branches have the same potential difference. For a fuller introduction, see Physics Formula Sheet by Topic and the site’s resources on electric circuits.
Thermal physics and gases
- Heating: Q = mcΔT, where c is specific heat capacity in J/(kg·K) and ΔT is the temperature change.
- Change of state: Q = mL, where L is specific latent heat in J/kg. During a phase change, supplied energy changes the state rather than the temperature.
- Ideal gas law: pV = nRT. Pressure p, volume V, amount n, gas constant R, and absolute temperature T must use compatible units. Temperature must be in kelvin.
A temperature difference has the same numerical size in degrees Celsius and kelvin, but an absolute temperature for gas calculations must be converted using T(K) = T(°C) + 273.15.
Modern physics
- Mass-energy equivalence: E = mc². This relates rest mass to energy; c is the speed of light in vacuum.
- Photon energy: E = hf, where h is Planck’s constant and f is frequency.
- Photon wavelength form: E = hc/λ. Use this when wavelength is given instead of frequency.
Constants such as h, c, and the elementary charge should be taken from the data sheet or specified reference for your course. The Physics Constants List can help you review what common constants represent.
Maintenance cycle
A formula sheet is more useful when it is maintained as a study tool rather than copied once and forgotten. At the start of a unit, add the equations introduced by your teacher or textbook. Next to each one, write a short condition such as “constant acceleration,” “near Earth,” “ideal gas,” or “resistance constant.” These conditions prevent a familiar formula from being used outside its valid model.
After each problem set, add one note about an error you made or a decision you found difficult. Examples include “convert kilometres to metres first,” “use displacement, not distance,” or “resolve the force along the slope.” This turns a static physics cheat sheet into personalized revision notes.
Once per revision cycle, check three things: symbols are defined, units are included, and equivalent forms are grouped together. For example, place P = IV, P = I²R, and P = V²/R together, then note which quantities must be known for each form. Use a separate constants section so that measured variables and universal or course-provided constants are not confused.
Signals that require updates
Update the sheet when your course reaches a new topic, when an equation appears in a lesson but not in your reference, or when practice questions reveal a recurring gap. A change in exam board, class specification, or university module may also alter the required notation, sign convention, or list of supplied constants. The underlying physics may be unchanged, but the expected method can differ.
Search intent can also reveal what the sheet needs. If you repeatedly look for “SUVAT formula choice,” “electric circuit equations,” or “waves and optics notes,” add a short decision guide rather than another unexplained equation. For motion, the Kinematics Equations Explained resource focuses on selecting an equation from the quantities given.
Common issues
Using an equation without checking assumptions
The constant-acceleration equations do not automatically apply to every moving object. Similarly, V = IR is not a complete description of every component under every condition. State the model before substituting numbers.
Mixing units
Convert all values to a consistent system before calculating. A time given in milliseconds, a length in centimetres, or a speed in kilometres per hour can create a large error if left unconverted. Show the conversion in your working.
Rearranging incorrectly
Rearrange symbolically before entering numbers. From F = ma, a = F/m; from P = IV, I = P/V. Writing the rearranged form first makes it easier to inspect the units and reduces calculator mistakes.
Reporting too many digits
Keep extra digits during intermediate steps, then round the final answer to a sensible number of significant figures. Include the unit and, where appropriate, a direction or sign.
For a repeatable approach to selecting equations and checking results, use How to Solve Physics Problems Step by Step. After calculating, compare the answer with an estimate and check its dimensions.
When to revisit
Revisit this physics formula sheet at the beginning of every new unit, before a timed practice session, and during the final phase of exam revision. A brief monthly check is useful for a long course, especially if you are collecting formulas from several chapters. Update it sooner when your teacher issues a new data sheet, your exam specification changes, or you discover an equation that you have been applying inconsistently.
Make the next review practical: choose three formulas, cover their names, define every symbol from memory, and solve one short problem for each. Then verify units, signs, and assumptions. Keep only equations that belong to your current course or label extension material clearly. For additional practice, use Physics Practice Questions by Topic and compare your method—not just your final number—with worked solutions.
A reliable formula reference should help you think faster, not encourage blind memorization. The strongest revision routine is to connect every equation to a diagram, a physical law, its units, and a situation where it applies.