Conservation of energy problems become much easier when you identify the system, list the energy stores, and account for every transfer. This step-by-step physics guide shows when to use energy methods, how to choose the right equation, how to handle friction and efficiency, and how to check whether your final answer is physically reasonable.
Overview
Use conservation of energy when a problem describes energy changing from one form to another. Common clues include an object falling, accelerating down a ramp, compressing a spring, moving through a loop, or losing energy because of friction. The central idea is that energy is not created or destroyed; it is transferred between stores or transferred into or out of a system.
For a closed system with no energy transferred to the surroundings, the total energy remains constant:
total energy before = total energy after
For many introductory physics problems, this becomes:
initial kinetic energy + initial potential energy = final kinetic energy + final potential energy
The most useful equations are:
- Kinetic energy: Ek = ½mv2
- Gravitational potential energy: Ep = mgh
- Elastic potential energy: Ee = ½kx2
- Work done by a constant force: W = Fs when the force acts in the direction of motion
- Power: P = E/t or P = W/t
- Efficiency: efficiency = useful output energy / total input energy
Here, m is mass in kilograms, v is speed in metres per second, g is gravitational field strength in newtons per kilogram, h is vertical height in metres, k is spring constant in newtons per metre, and x is extension or compression in metres. Energy is measured in joules.
Energy methods are especially useful when you need speed or height but do not need to know the time taken or the detailed forces during the motion. If the question asks for acceleration, tension, or the resultant force at a particular point, a free-body diagram and Newton’s laws may be more appropriate. You can compare the two approaches with this guide to how to solve physics problems step by step.
Checklist by scenario
1. Start with the system and two positions
- Choose the object or group of objects that make up your system.
- Label the initial position and the final position.
- Choose a convenient zero level for gravitational potential energy.
- List the energy stores at each position.
- Decide whether energy is transferred to the surroundings by friction, air resistance, a motor, or another force.
The choice of zero height is flexible. Only changes in gravitational potential energy matter, so you can set the ground, the starting point, or another reference level to h = 0. Use the same reference consistently throughout the calculation.
2. Falling objects and ramps without friction
If an object starts from rest at height h and reaches a lower point with speed v, gravitational potential energy becomes kinetic energy:
mgh = ½mv2
The mass cancels, giving:
v = √(2gh)
Worked example: A 2.0 kg object slides from rest down a frictionless ramp through a vertical drop of 1.8 m. Find its speed at the bottom. Taking g = 9.8 m/s2:
mgh = ½mv2
v = √(2 × 9.8 × 1.8) = 5.94 m/s
The ramp angle and length are not needed for this calculation because the vertical height change determines the gravitational energy lost. The answer assumes negligible friction and air resistance.
3. Problems involving friction
Friction transfers some mechanical energy into internal energy, usually associated with heating. Include this transfer on the energy accounting side of the equation:
initial energy = final mechanical energy + energy dissipated
If friction has constant magnitude f over distance s, the energy dissipated is:
Efriction = fs
Worked example: A 4.0 kg block starts from rest and slides down a ramp with a vertical drop of 2.0 m. Friction does 18 J of energy-dissipating work. Find the speed at the bottom.
The starting gravitational energy is mgh = 4.0 × 9.8 × 2.0 = 78.4 J. Of this, 18 J is transferred by friction, leaving:
½mv2 = 78.4 − 18 = 60.4 J
v = √(2 × 60.4 / 4.0) = 5.50 m/s
Do not subtract friction twice. Either use the stated energy dissipated directly or calculate it from fs; both represent the same transfer.
4. Springs and elastic energy
For an ideal spring, elastic potential energy can become kinetic energy:
½kx2 = ½mv2
If the spring launches an object upward, include gravitational potential energy as well:
½kx2 = ½mv2 + mgh
Use the extension or compression in metres. Because the displacement is squared, using centimetres instead of metres can produce a major error.
5. Work done by an external force
Sometimes energy is added to a system by a push, motor, or lifting force. If a constant force acts in the direction of displacement, the work done is W = Fs. A general form is:
W = Fs cos θ
where θ is the angle between the force and displacement. Work done by an external force can increase kinetic energy, gravitational potential energy, elastic energy, or internal energy.
The work-energy theorem is useful when the question focuses on net work:
net work = change in kinetic energy = ½m(vf2 − vi2)
6. Efficiency and power
For machines, motors, and lifting systems, distinguish between input energy and useful output energy:
efficiency = useful output energy / input energy
To express efficiency as a percentage, multiply the decimal result by 100. For example, if a motor receives 500 J and transfers 360 J to the useful motion, its efficiency is 360/500 × 100 = 72%.
Power describes how quickly energy is transferred, not how much energy is transferred overall. A machine that transfers 600 J in 3 s has a power output of 600/3 = 200 W.
7. Roller coasters and vertical loops
For a roller coaster, mark the height and speed at each important point. At the top, energy may be mostly gravitational potential; at the bottom, it may be mostly kinetic. If the track is not frictionless, include the energy dissipated. In a vertical-loop problem, conservation of energy can find speed at different heights, but it does not by itself prove that the car remains in contact with the track. That separate condition requires a force analysis.
What to double-check
- Units: Convert grams to kilograms, centimetres to metres, and kilometres per hour to metres per second before substituting.
- Height change: Use the vertical difference in height, not automatically the distance travelled along a slope.
- Speed versus velocity: Kinetic energy uses speed, and the speed is squared, so direction does not affect its value.
- Mass cancellation: Mass cancels in some ideal falling-object calculations, but not when friction, applied forces, or other mass-dependent terms are included.
- Signs and transfers: You can write energy lost to friction as a positive quantity on the loss side, or use signed work consistently. Do not mix conventions halfway through.
- Reference height: Any zero level is acceptable, but both initial and final heights must be measured from the same level.
- Significant figures: Match the precision of the data rather than reporting an unnecessarily precise result.
A quick unit check often catches an incorrect equation. Kinetic, gravitational, elastic, and work terms must all have units of joules. Since a joule is equivalent to a newton-metre, an expression such as mgh has units of kilograms times metres squared per second squared, which is consistent with energy.
If a problem gives a diagram, annotate it before calculating. Mark the vertical height, direction of motion, friction, spring displacement, and any external input. For force-based questions, draw a free-body diagram as well; the free-body diagram guide can help with that step.
Common mistakes
Choosing an equation before identifying the energy stores
Do not begin by searching for a formula that contains the unknown. First describe what changes. If an object slows while rising, kinetic energy is decreasing and gravitational potential energy is increasing. That physical description tells you which terms belong in the equation.
Using distance instead of vertical height for gravitational energy
Gravitational potential energy depends on vertical height, mgh. The length of a ramp matters for friction work, because friction may act over the ramp distance, but it does not replace the vertical height in mgh.
Assuming mechanical energy is always conserved
Total energy is conserved, but mechanical energy can decrease when friction or air resistance transfers energy into internal energy. State the assumption clearly: frictionless, negligible air resistance, or energy loss of a specified amount.
Forgetting that kinetic energy depends on speed squared
If speed doubles, kinetic energy becomes four times larger for the same mass. This is why a small arithmetic or unit error in speed can create a much larger energy error.
Confusing power with energy
Energy is the amount transferred and is measured in joules. Power is the rate of transfer and is measured in watts, or joules per second. Keep the time in a power calculation, but do not insert it into a basic conservation equation unless the problem describes a rate or power input.
Ignoring what the question actually asks
Conservation of energy can find speed, height, spring extension, work, and efficiency, but it may not provide every force or acceleration. If the required quantity concerns force at a point, use Newton’s laws alongside the energy equation.
When to revisit
Return to this checklist whenever a new problem changes the energy stores or the system boundary. Before an exam, practise one example from each major scenario: a frictionless height change, a ramp with friction, a spring, an external work problem, and an efficiency or power calculation. Then explain aloud why each term appears in the equation.
For a practical revision routine, use this five-step check:
- Circle the initial and final positions in the question.
- Write the energy stores before substituting numbers.
- State any assumption about friction, air resistance, or efficiency.
- Convert every quantity to compatible SI units.
- Check the units, sign, magnitude, and physical meaning of the answer.
Try these short practice questions after reviewing the method:
- A 0.50 kg ball is dropped from a height of 3.0 m. Ignoring air resistance, what is its speed just before impact?
- A 2.0 kg object moving at 4.0 m/s has what kinetic energy?
- A spring with constant 200 N/m is compressed by 0.10 m. How much elastic potential energy is stored?
- A machine receives 800 J and provides 600 J of useful output. What is its efficiency?
Answers: 1. 7.67 m/s, using v = √(2gh); 2. 16 J; 3. 1.0 J; 4. 75%. If your result differs, redo the setup before checking the arithmetic. For broader practice, combine these questions with relevant physics formula notes and a structured physics exam revision plan.
The most reliable habit is simple: describe the energy transfer in words before writing the equation. Once the system, stores, and losses are clear, the algebra is usually the shortest part of the problem.