How to Draw Free-Body Diagrams and Solve Newton’s Laws Problems
newtons-lawsfree-body-diagramsforcesfrictionworked-examplesexam-prep

How to Draw Free-Body Diagrams and Solve Newton’s Laws Problems

SStudy Physics Editorial Team
2026-11-12
9 min read

Learn to draw accurate free-body diagrams, identify forces, choose axes, and solve Newton’s laws problems step by step.

A free-body diagram turns a physics situation into a set of forces you can analyse. This guide shows you how to identify forces, draw a clear diagram, choose useful axes, resolve components, and use Newton’s second law to solve problems reliably. It also includes a force checklist, worked examples, common error checks, and a practical review routine for improving your Newton’s laws solutions.

Overview

A free-body diagram (FBD) is a simplified picture of one object and all the external forces acting on it. The object is usually represented by a dot or a box, while each force is shown as an arrow beginning at the object. The arrow’s direction represents the force direction; its length may suggest relative size, although it is not normally drawn to scale.

The most important rule is to draw a separate diagram for each object you analyse. Do not draw forces that the object exerts on something else. For example, if a table supports a book, the upward normal reaction on the book belongs on the book’s diagram. The downward force exerted by the book on the table does not.

Once the diagram is complete, apply Newton’s second law independently along each chosen direction:

ΣF = ma

Here, ΣF means the vector sum of the forces, m is mass, and a is acceleration. A good solution therefore has three connected stages:

  1. Represent the situation with a correctly labelled free-body diagram.
  2. Resolve forces into components along selected axes.
  3. Write and solve an equation for each relevant direction.

This approach works for many introductory mechanics questions, including friction problems, connected objects, lifts, slopes, and objects pulled at an angle.

What to track

1. Track the object being analysed

Start by writing the object’s name or drawing a boundary around it. Ask: “Which body am I applying Newton’s second law to?” This prevents forces from different objects being mixed into one diagram.

Then identify whether the object is accelerating. If it is stationary or moving at constant velocity, the resultant force is zero, so ΣF = 0. If its speed or direction is changing, the resultant force is ma in the direction of the acceleration.

2. Track every possible external force

ForceDirection to drawWhen it appearsUseful model
Weight, W = mgVertically downwardWhenever the object has mass in a gravitational fieldg is often taken as approximately 9.8 m/s² unless the question specifies another value
Normal reaction, NPerpendicular to the contact surfaceWhen the object touches a surfaceIt is not automatically equal to weight
Tension, TAlong a taut string, away from the objectWhen a string, rope, or cable pulls the objectA string cannot push in the usual ideal model
Friction, fAlong the contact surface, opposing relative or impending motionWhen surfaces resist slidingFor kinetic friction, f = μN; static friction may be less than or equal to its limiting value
Drag or air resistanceOpposite the object’s velocity through the fluidWhen air or another fluid significantly resists motionThe size may depend on speed and the model provided
Applied forceIn the direction of the push or pullWhen an external person, motor, or device acts on the objectResolve angled forces into horizontal and vertical components

Do not add a force simply because it seems physically possible. Add it when the situation describes the relevant interaction or when the chosen model requires it. For example, if air resistance is ignored, do not include a drag arrow.

3. Track force pairs without putting both on one diagram

Newton’s third law states that interacting objects exert equal and opposite forces on each other. These forces act on different objects, so they belong on different free-body diagrams. The normal reaction on a book from a table and the book’s force on the table form a third-law pair; they are not two forces that cancel on the book.

4. Track components and signs

Choose positive directions before writing equations. A force pointing in the positive direction receives a plus sign; a force pointing opposite it receives a minus sign. If a force is angled, resolve it consistently. For a force F at angle θ above the horizontal:

  • Horizontal component: F cos θ
  • Vertical component: F sin θ

The definitions change if the angle is measured from a different axis, so sketching the right triangle is safer than relying on memory.

Cadence and checkpoints

Use the following step-by-step workflow each time you solve a Newton’s laws problem.

Step 1: Describe the motion

State whether the object is stationary, moving at constant velocity, or accelerating. Identify the likely direction of acceleration from the wording, diagram, or known motion.

Step 2: Isolate the object

Draw only the object under consideration. For a system of connected objects, you may first draw separate diagrams and then, if useful, draw a system diagram in which the internal tension forces cancel.

Step 3: Add and label forces

Use the checklist: weight, contact forces, tension, friction, drag, and applied forces. Draw each arrow from the object and label it with a symbol. Avoid labels such as “force” when a more precise label—such as T, N, or mg—is available.

Step 4: Choose axes

For a horizontal surface, horizontal and vertical axes are usually convenient. For an inclined plane, choose one axis parallel to the slope and one perpendicular to it. This often avoids resolving the normal reaction and makes the acceleration direction clearer.

Step 5: Resolve angled forces

Break any force that is not parallel to an axis into components. On a slope of angle θ, weight is commonly resolved into mg sin θ parallel to the slope and mg cos θ perpendicular to the slope, provided θ is measured from the horizontal in the standard setup.

Step 6: Write one equation per axis

For each direction, write the signed sum of forces equal to mass times acceleration. If there is no acceleration perpendicular to a surface, the equation in that direction may be ΣFperpendicular = 0.

Step 7: Solve and check

Substitute values only after the symbolic equation is correct. Check units, signs, direction, and limiting behaviour. A force should be in newtons, mass in kilograms, acceleration in metres per second squared, and friction coefficients should have no units.

Worked example: block on a rough horizontal surface

A 5.0 kg block is pulled horizontally by a 20 N force. Kinetic friction is 8.0 N and acts opposite the motion. Find the acceleration.

Diagram description: Draw a box with an upward normal reaction N, downward weight mg, a 20 N arrow to the right, and an 8.0 N friction arrow to the left.

There is no vertical acceleration, so:

ΣFy = N − mg = 0

Horizontally, taking right as positive:

ΣFx = 20 − 8.0 = ma

12 = 5.0a

Therefore, a = 2.4 m/s² to the right. The result is reasonable: the applied force is larger than friction, so the block accelerates in the pulling direction.

Worked example: block on an inclined plane

Consider a block sliding down a slope of angle θ with kinetic friction acting up the slope. Choose the positive axis down the slope. The forces parallel to the slope are the downhill component of weight, mg sin θ, and friction, f, uphill.

The equation is:

mg sin θ − f = ma

Perpendicular to the slope, assuming the block remains in contact and has no acceleration away from the surface:

N − mg cos θ = 0

Thus, N = mg cos θ. If kinetic friction is modelled by f = μN, substitute the normal reaction only after finding its value. This sequence reduces errors because friction depends on the contact force, not automatically on the full weight.

How to interpret changes

When your answer or diagram changes unexpectedly, use the following diagnostic checks rather than restarting the entire problem.

  • The acceleration has the wrong direction: Check your positive axis and the signs in the resultant-force equation. A negative answer can be valid; it means the real acceleration is opposite to your assumed positive direction.
  • The normal reaction equals weight when it should not: Look for vertical components of an angled pull, vertical acceleration, or an inclined surface. The equality N = mg applies only in particular situations.
  • Friction points the wrong way: Friction opposes relative or impending sliding at the contact, not necessarily the object’s overall direction of travel. Re-examine which surface would slide relative to the other.
  • A tension force appears twice on one object: Tension acts along each string segment attached to that object. Do not add a reaction from the other object unless it genuinely acts on the body being analysed.
  • The acceleration is too large or too small: Compare the resultant force with the mass. More net force should produce more acceleration; more mass should produce less acceleration for the same net force.
  • The units do not work: Convert grams to kilograms and check that every term in the equation represents a force before combining it with another force.

For exam practice, keep a short error log. Record whether each mistake came from identifying a force, choosing axes, resolving components, applying a friction model, or doing algebra. Review the log after several problems to find recurring weaknesses. For related motion questions, compare this method with the step-by-step kinematics problem guide and use the physics formula sheet only after you understand what each equation represents.

When to revisit

Return to this guide whenever you begin a new mechanics topic, notice repeated free-body diagram errors, or move between course levels with different notation or friction assumptions. A monthly or quarterly review is useful during a long revision period: complete two or three problems without looking at the checklist, then audit each diagram against the force categories and equation steps.

Update your personal notes when your course specification or formula sheet changes terminology—for example, “reaction force” versus “normal reaction,” or a different stated value for gravitational field strength. Also add a new example after each major practice set or exam season, especially if it introduces an unfamiliar arrangement such as two connected masses, a lift, a pulley, or an angled applied force.

Before submitting homework or starting an exam, use this final checklist:

  1. Did I identify the exact object or system?
  2. Did I include every stated external force and exclude forces acting on other objects?
  3. Are all arrows labelled and pointing in physically justified directions?
  4. Are my axes aligned with the motion or surface where practical?
  5. Did I resolve angled forces consistently?
  6. Did I write ΣF = ma separately for each axis?
  7. Do the units, sign, direction, and size of the final answer make sense?

With repeated use, a free-body diagram becomes more than a drawing: it becomes an audit trail from the physical situation to the final equation. That habit is the foundation of accurate Newton’s laws problems and a dependable part of physics exam preparation.

Related Topics

#newtons-laws#free-body-diagrams#forces#friction#worked-examples#exam-prep
S

Study Physics Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.